Ratflap 110mm

ratflap sewer valve 110mm

ratflap 110mm valves

CLICK HERE TO VIEW OUR NON RETURN VALVES

 

Welcome to the sewerstore and our range of 110mm non return valve ratflap.

If you are looking at this product it is likely you unfortunately have a rodent or flooding problem, luckily we can provide you with a cost effective solution using our rat flap non return valve.

Firstly we are a pest control company based in Swindon Wiltshire and have decided to develop our own range of non return valves as others on the market were simply not up-to the task. We have tried and tested our products in real situations and have resolved customer problems where other products have failed using our stainless steel rat flap

 

.

 

The main difference with our ratflap compared to others is that they are fully stainless steel apart from the rubber seal. Plastic versions of the rat blocker for drains on the market but they get damaged by rats causing them to fail, also on the market are steel flaps but they use internal hinges and in our opinion waste such as tissue paper etc can get caught on the hinge and potentially cause a blockage. Our ratflap valves are welded using stainless weld and stainless hinge meaning there is nothing within the body for waste to foul on. Also no other stainless ratflap 110mm valves  are available for flooding defence.

1110mm non return valve plastic

Picture of a plastic non return valve incorrectly installed and fouling

 

Our ratflap 110mm valves are push fit and should be installed in the sewer chamber, we have used them successfully inline and reverse fitted them. We offer three variations these are Flood defence valve, Rodent Flap Valve Without Cable and Rodent Flap Valve With Cable.

Our ratflap 110mm valve are built using 304 stainless steel body, hinges and flap. Please visit our main website for further images of our products.

All ratflap valves are shipped with instructions on how to fit and you can email or call us if you have any questions. If you would like to clarify that our valves will fit your sewer please email us a picture and we would be happy to assist.

The rat flap rat blocker  can be installed by anybody who has a small amount of DIY experience but if in doubt please contact a Plumber, Pest Controller or Drain specialist. Please remember that when working in sewers to wear protective clothing including eye protection and protective gloves due to the risk of disease.

How to Install our  ratflap 110mm non return valve

Please Click Here For Installation Instructions

comodo_secure_100x85_white

Below are some images of installed 110mm ratflap non return valve rat barrier drain protection . If you require fitting please contact us at admin@www.sewerstore.controlpestsolutions.co.uk and we will put you in touch with a installer in your area who can install the non return drain valve.

If you are in the Wiltshire, Oxfordshire or Gloucestershire area our parent company fits the 110mm non return valves please visit www.pestcatcher.co.uk

110mm non return valve ratflap

rats chewing manhole lid ratflap